Suspension Magnet

KUMAR Suspension a type Magnets are useful for products carried by the Conveyor belt.

Suspension Magnets use is recommended for low contamination products. If the frequency of the impurities is very much, it will make a layer shunting magnetic field. Hence, the equipment required frequent cleaning. Over band type Magnetic Separator is recommended for this type of application.

The principal applications are for processing of bulk products such as Culets, Glass, coffee , Cereals, Minerals, Coal and Sugar etc.,

INSTALLATION

KUMAR Suspension magnets can be installed at the end of belt above the head drum or across the Conveyor belt .

Toavoid disturbances to the magnetic field, in both cases, the magnetic parts must be placed below the surface of the magnet.

The installation  is recommended for high speeds. Due to trajectory of the products and the fact that it is then fluidized, separation is more efficient.

Magnetic Plates

Permanent Magnetic Plates are used for separation of tramp iron found in Tea. Tobacco, Coffee, Cocoa, Milk Powder, Chemicals etc.

They are available in both flat and curved shapes and could be installed either above or along the passage of materials flow. They are provided with Clamps and could be located on the conveyor of carrying such materials ideally, they are located 30 mm above the layer of material flow. These plates are constructed with high energy permanent magnets plated in a magnetic circuit. They are extensively used in CTS Tea machinery and in Biscuit stacking machines. They are available in various sizes as per the requirement.

Magnetic Separator

Kumar Permanent Drum Type Magnetic Separator is most useful non electric separator for separating tramp iron from non magnetic material processed in bulk quantity for the purity of end products recovery of metals having commercial value end protection of processing plant and machinery. These are widely used in all the processing Industry for separation of iron contamination from minerals, chemicals food , flour, plastics, grains sand, cement fertilizers, abrasives, glass slag, ores rock and many other products.

Working Principle & Magnetic System:

The Permanent Magnetic Drums consists of a stationary Permanent magnetic assembly having uniform and everlasting Magnetic field across the entire width of the drum, which is effective over approximately half the drum circumference.

Drum shell made of non Magnetic stainless steel revolves around the magnetic field. As the material fed evenly from the chute falls over drum, powerful magnetic field attracts and holds ferrous particles to the revolving shell. As the revolving shell carries the Iron particles through the stationery magnetic field the non-magnetic material falls freely  from the shell while ferrous particles are firmly held until carried beyond devider and out of magnetic field.

The strength of the Permanent Magnetic Drum is guaranteed to be greater than corresponding electromagnetic drum. The Permanent magnets used are everlasting magnets and its strength does not diminish during normal use and can be used through

High Intensity Roller Type Magnetic Separator

KUMAR have Developed High Intensity, High Gradient, Permanent Magnetic Roller Separators with the indigenous Technology. This technology can be successfully used in Industrial Minerals applications. The Technology involves high energy Rare Earth Neodymium Permanent Magnetic Roll Assembly, Which is developed and assembled under strict quality control and specification to generate unsurpassed Magnetic Field Gradients. Under this high Intensity Magnetic Field, weekly Magnetic Contamination can be easily removed effectively.

Operating Method :

A Short conveyor belt envelopes the Magnetic Roll and tensioning the Ideal Roll. An efficient Feeder discharges material on the Belt. The Ferro Magnetic and Para-magnetic particles adheare to the Belt while the non-magnetic particles flow freely off the end of the Conveyor.

Features of Roller Type Magnetic Separator:

Magnetic Rolls are available in 65, 75 & 100 mm dia and widths upto1500mm . Kumar Roller Type Magnetic Separator are three different Magnetic Strengths i. e. 10,000 Gauss, 20,000 Gauss and 22,000 Gauss. The Roll is driven by a 0.5 HP, variable speed DC/AC geared Motor drive adjustable from 0 to 100 RPM. For the purpose of Feeding, Vibratory Feeder with Control is Provided.  Roller Type Magnetic Separator is Provided with Abrasion resistant endless conveyor Belts of 0.8mm thickness.

Applications :

Kumar Roller Type Magnetic Separator  are most suitable for various types of Industrial Minerals applications i. e. Abrasive, Refractory and Ceramic Raw Material benefaction, Alumina, Silica, Carbide, Magnestic, Quartzite, etc. Glass Raw Materials, Clean Silica Sand, quartz, Feldspar, Dolomite etc., Ultra High Purity Quartz Cleaning, Graphite Upgrading, manganese  Orebenification, Bauxite Upgrading, Diamond ore benefaction, Selective Separation of Garnet / Ilmenite/Rutile, Zircon, Benefaction of Iron ore, Recovery of Metals from Slag, Removal of Ferro Silicate from Limestone, Megnesite etc.

leading supplier in the Magnetic Equipment

KUMAR INDUSTRIES, a pioneer company in the field of High Power Permanent Magnetic Equipments since 1986 is based at Ahmedabad (Gujarat), India.  We are a leading supplier in the Magnetic Equipment field.  With the vast knowledge and experience in the field, we supply the best Magnetic Equipments to suite the needs of our customers.

The quality of our products are highly acclaimed in the market by our customers.  We have a large base of satisfied customers.  We are constantly endeavored to incorporate the most modern technology in our products to the entire satisfaction of our customers.

Plant & Office

L-456, G.I.D.C. Industrial Estate,
Near SBI, Odhav, Ahmedabad – 382 415
Gujarat, (India)

Phone: + 91 (079) – 22871051/22876051
Fax: 91 (079) – 22871043

E-Mail: kumarin@kumarmagnet.com / info@kumarmagnet.com